Minco electrically isolated RTD probes feature an electrically isolated sensing tip, enabling temperature sensing with electrically hot bearings. They also feature a sensing tip constructed of copper alloy. The copper tip is twenty times more conductive than stainless steel, providing increased sensitivity and rapid response to changes in temperature The tip sensitive design also focuses the temperature sensitive portion of the sensor near the tip of the probe, providing improved accuracy in thermowells, bearings and other installations.
For applications requiring:
| Element Type | Platinum, Single |
| Resistance | 100 Ω ±0.1% at 0°C (Meets EN60751, Class B) |
| TCR | 0.00385 Ω/Ω/°C |
| Case Diameter (in) | 0.215 |
| Length (in) | 12.000 |
| Lead Length (in) | 36 |
| # Leads | 3 |
| Base Model | S852 |
| Element Code | PD |
| Temperature Range | -50 to 260°C (-58 to 500°F) |
| Pressure Rating | 30 psi (2.1 bar) |
| Vibration | Withstands 10 to 2000 Hz at 20 G's min. per MIL-STD-202, Method 204, Test Condition D |
| Shock | Withstands 100G's min. sine wave shock of 8 milliseconds duration |
| Insulation Resistance | 1,000 megohms min. at 500 VDC leads to case |
| Dielectric Strength of Isolation Insulator | 1,000 volts RMS at 60 Hz for 30 seconds, between case sections, 1 mA max. leakage current |
| Documentation | |
| Technical Specification | MCTS Electrically Isolated RTDs.pdf |
For more than 60 years, Minco has designed and manufactured heating, flex circuit, temperature sensing and instrumentation solutions for some of the world’s most demanding applications.
Thermal performance for standard and custom use cases — from environment stabilization to faster thermal cycling.
Accurately sense and measure temperature, humidity and fluid levels across a wide range of applications.
Achieve new design freedom with flex circuit solutions that improve reliability in a condensed package size.
System-matched controllers complement Minco sensors and heaters to deliver improved system accuracy.
