Search
Close this search box.

RTD Connections: 2 Wire, 3 Wire, 4 Wire?

Because an RTD is a resistance type sensor, resistance introduced by connecting copper extension wires between the RTD and control instrument will add to readings. Furthermore, this additional resistance is not constant but increases with ambient temperature. To estimate leadwire error in 2-wire circuits, multiply the total length of the extension leads times the resistance per foot in the table below. Then divide by the sensitivity of the RTD, given in the next two pages, to obtain an error figure in °C. For example, assume you have connected 100 feet of AWG 22 wires to a 100 Ω platinum RTD (PD element).

Lead resistance is:

RTD equaton 1

Approximate error is:

RTd connect equation 2
RTd connect chart

You can reduce leadwire error by:

  • Using larger gauge extension wires.
  • Specifying an RTD with greater sensitivity; 1000 Ω instead of 100 Ω, for example.
  • Employing a 3 or 4-wire resistance canceling circuit as shown at right. Common leads, connected to the same end of the sensing element, are the same color.
  • Using a 2-wire current transmitter. Its linearized signal is immune to electrical noise as well as resistance and can maintain accuracy over runs of several thousand feet.

2-wire RTD

2 wire temperature sensor rtd
Shown above is a 2-wire RTD connected to a typical Wheatstone bridge circuit. ES is the supply voltage; EO is the output voltage; R1, R2, and R3 are fixed resistors; and RT is the RTD. In this uncompensated circuit, lead resistances L1 and L2 add directly to RT.

3-wire RTD

3 wire RTD circuit
In this circuit there are three leads coming from the RTD instead of two. L1 and L3 carry the measuring current while L2 acts only as a potential lead. No current flows through it while the bridge is in balance. Since L1 and L3 are in separate arms of the bridge, resistance is canceled. This circuit assumes high impedance at EO and close matching of resistance between wires L1 and L3. Minco matches RTD leads within 5%.

4-wire RTD

4 wire RTD
4-wire RTD circuits not only cancel leadwires but remove the effects of mismatched resistances such as contact points. A common version is the constant current circuit shown above. IS drives a precise measuring current through L1 and L4. L2 and L3 measure the voltage drop across the RTD element. EO must have high impedance to prevent current flow in the potential leads. 4-wire circuits may be usable over longer distances than 3-wire, but you should consider using a transmitter in electrically noisy environments.
RTD combo
If necessary you can connect a 2-wire RTD to a 3-wire circuit or 4-wire circuit, as shown to the above. As long as the junctions are near the RTD, as in a connection head, errors are negligible.

NEED HELP BUILDING THE RIGHT PART?

Build a part number according to your specifications.

LOOKING FOR A CUSTOMIZED SENSING SOLUTION?

Half of the sensors we produce are custom engineered designs developed for challenging applications. Our Engineers are ready to help.

INTERESTED IN A STANDARD PART?

Fully half our sensors are engineered custom designs that deliver the best fit for challenging applications. Our Engineers are ready to help.

NOT SURE WHICH MINCO PRODUCTS FIT YOUR APPLICATION?

ABOUT MINCO

For more than 60 years, Minco has designed and manufactured heating, flex circuit, temperature sensing and instrumentation solutions for some of the world’s most demanding applications.

PRODUCTS

Address a specific design challenge or customize fully integrated solutions with Minco’s proven product lines.

Thermal performance for standard and custom use cases — from environment stabilization to faster thermal cycling.

Accurately sense and measure temperature, humidity and fluid levels across a wide range of applications.

Achieve new design freedom with flex circuit solutions that improve reliability in a condensed package size.

System-matched controllers complement Minco sensors and heaters to deliver improved system accuracy.

Leverage decades of engineering expertise to design integrated solutions that enhance performance and reduce cost.
Learn more about Minco’s approach to design innovation – and consider joining the team.