Flex circuit manufacturing - technical capabilities and standard specifications
Listed below are Minco’s standard materials and specifications for flex circuits. These serve only as guidelines. Contact Minco for special materials, tighter tolerances, and any other exceptions that arise in your application. For a summary of Minco’s capabilities, view our Flex Circuit Capability Roadmap.
Jump to:
1. Physical properties
Circuit size/standard panel size: 10.5 × 22" max./12 × 24",
16.5 × 22" max./18 × 24", 267 x 559mm max./305 x 610mm,
419 x 559mm max./457 x 610mm
Layers: 16 maximum.
Conductor width/space:
0.0015” (0.038mm) minimum /0.0015” (0.038mm) minimum.
Hole diameter (plated): 0.002” (0.051mm) minimum.
Aspect ratio (ratio of hole depth/hole diameter):12:1 maximum.
Outline dimensions and hole-to-border tolerance:
SRD: 0.015” (0.38mm) + 0.1% linear distance
Laser/Hard tool: 0.003” (0.08mm) + 0.1% linear distance
CMD: 0.010” (0.25mm) + 0.1% linear distance
Cluster-to-cluster tolerance:
0.002” (0.05mm) + 0.1% linear distance
Bend radius (flexibility):
Single-layer: 6 × circuit thickness (minimum)
Double-layer: 12 × circuit thickness (minimum)
Multilayer: 24 × circuit thickness (minimum)
Circuit thickness is approximately 0.006" (0.15mm) per layer.
Sharper, permanent bends are common for bend-to-install
applications. Contact Minco to ask about factory forming.
Temperature: -65 to 150°C (-85 to 302°F).
Will withstand a 5-second solder immersion at 260°C (500°F)
without blistering, delaminating, or discoloring.
Chemical resistance: No detrimental loss of physical properties
when immersed for 15 minutes in acetone, methyl alcohol,
toluene, or trichloroethylene.
2. Materials
Cover/substrate: Polyimide film: 1 mil (25μm)*, 2 mil (50μm)*,
3 mil (75μm), 5 mil (125μm); Photoimageable Coverlay (PIC);
Epoxy glass or polyimide glass (rigid-flex)
Conductor:
Copper: 1/8 oz. (5μm), 1/4 oz. (9μm), 1/3 oz. (12μm),
1/2 oz. (18μm)*, 1 oz. (35μm)*, 2 oz. (71μm), 3 oz. (107μm)
Cupronickel: 0.625 mil (15μm), 0.9 mil (22μm), 1.3 mil (33μm),
1.9 mil (48μm), 2.3 mil (58μm)
Nickel: 2 mil (50μm), 5 mil (125μm)
Adhesive: Acrylic*, flame retardant, epoxy, epoxy prepreg,
polyimide prepreg, phenolic
Stiffener: Epoxy-glass (FR-4), polyimide-glass, polyimide, copper,
aluminum.
* These are the most common materials used for manufacturing flex circuits
for maximum flexibility. Contact Minco for materials not listed
or special considerations (e.g. implantable devices, extended temperature
range, etc.)
3. Surface finish (plating)
Plating methods: Panel, selective, thruhole, blind via, buried via
Plating materials: Solder, hard gold, soft gold, tin, nickel, electroless
nickel with immersion gold (ENIG), OSP
4. Electrical characteristics
Insulation resistance: 100 MΩ minimum @ 25°C (77°F),
assuming 0.010" (0.25mm) minimum conductor spacing.
Dielectric (typical): 1000 VRMS @ 60 Hz for 30 seconds, 1 mA
maximum leakage current.
Shield layers: Solid or grid patterns; copper foil or screened
conductive ink.
Inductor/Antenna coils: Specify inductance (10 mH to 30 mH,
typical). Wire-wound coils may be integrated into the circuit.
The cover encapsulates the coil, conductors, and coil connections.
For details, see Flex-Coils™- Technical Specification FC01.
Heaters/Temperature sensors: Minco is a leading manufacturer
of temperature sensors and Thermofoil™ flexible heaters. We
have the unique ability to integrate these components and a
flex circuit into a single package, drastically reducing assembly
time and potential errors. Call Minco to discuss your application,
or visit www.minco.com.
5. Value added assemblies
Connectors:
Clincher: 0.100" (2.54mm) minimum, center-to-center;
Micro series: 0.050" (1.27mm) minimum, center-to-center;
Nano series: 0.025" (0.63mm) minimum, center-to-center.
Optional epoxy potting is available.
Fingers:
Supported: 0.006" (0.15mm) minimum, center-to-center;
Unsupported: 0.020" (0.50mm) minimum, center-to-center.
In-line or right angle.
Pins:
Swaged/soldered: 0.085" (2.15mm) min., center-to-center; 0.100" (2.54mm) typical.
Brazed: 0.035" (0.89mm) min., center-to-center.
Active Components:
Pick-and-place, Hand solder or braze
Surface mount, through hole, embedded
Quality management
Minco is certified to ISO 9001: 2000 / AS/EN/SJAC9100 quality system requirements. Learn more about quality assurance for flex circuits.